Sherlotronics

Sherlotronics remote transmitters

• Code hopping encryption
• Unique antenna design incorporating the keyring increases operating range by 50%
• Crystal frequency-controlled within +/- 100KHz
• Frequencies available are 403.55MHz and 433.92MHz
• 12V Battery operation - GP23A alkaline cell
• Typically 2 years battery life expected under normal use
• LED flashes when there is a low battery condition
• Rubber buttons are easy to press and click positively

Sherlotronics wall mount transmitter

• Code hopping encryption
• Audible piezo output
• Weather-proof / splash proof housing
• 3V Long life lithium battery
• Frequency stability controlled +/- 75KHz
• 403.55MHz or 433.92MHz can be selected

• 100m Line-of-sight
• 8,000 x Temotes total capacity
• 12Vdc voltage input
• 2,000 Real-time date event logging
• USB 2.0
• MicroSD card for back-up / restore
• Password protection

Sherlotronics 1 Channel standalone fixed transmitter 

Sherlotronics 4 Channel standalone transmitter

• Code hopping encryption
• 4 Channel telemetry outputs
• Normally open or normally closed trigger inputs
• LED indication when a channel is triggered
• Crystal frequency stability controlled +/- 100KHz
• 1 or 3 transmit signals can be selected
• All inputs are supervised
• On / off software selectable for pump version receivers

• 10 - 14V DC
• 1 sec to 59 min timer output
• 1 min to 24 hrs timer output
• Auto door closure
• Guard awake timer
• Pulse stretcher
• Counter
• Count down trigger output
• False alarm prevention
• Momentary to latching

• Long-range performance: 500m line-of-sight
• Signal reception LED indicator
• 12V - 24V AC/DC voltage input

Sherlotronics receivers

• Performance: 150m Line-of-sight
• 32 x Transmitter memory
• 1 or 3 Second relay closure setup
• Latching relay closure setup
• 12V - 24V AC/DC voltage input
• On-board buzzer and learn switch

Sherlotronics receivers

• Performance: 500m Line-of-sight
• 32 x Transmitter memory per relay
• 1 or 3 Second relay closure setup
• Latching relay closure setup
• 12V - 24V AC/DC voltage input
• On-board buzzer and learn switch
• 1 / 4 - Wave screw on rubber duck aerial
• Weatherproof ABS housing

Sherlotronics repeater receivers / transmitter

• Auto repeats all Sherlotronics' code hopping transmitters
• Transmitting range: 1.5km Line-of-sight
• Receiving range: 800m Line-of-sight
• 'System alive' test every 4 hours
• 'Low battery' signal when unit drops below 10V
• Capable of operating reliably at 8V 
• 'Signal mask' feature when 5 signals are received within 30 seconds from the same transmitter. The mask will be active for 1 min to prevent excessive noise on the frequency 
• 'Low battery' & 'system alive' can be programmed into the mimic base unit for monitoring purposes

Sherlotronics 1 Button pendant transmitter

• Large illuminating red button
• Splash proof button membrane
• Chain for wearing around neck
• Wall mountable cradle available
• Black housing